SAGEMCOM F@ST 2704R Installation Guide Page 212

  • Download
  • Add to my manuals
  • Print
  • Page
    / 223
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 211
Page
A
-6 F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
A
-
A
nnex
A
- Troubleshootin
g
7. If a test fails, click on the corresponding Help link to access detailed information and problem-solving
procedures.
8. Click on Test to check the problem is solved and resume the connection tests.
If none of the above helps you solve the problem, and you are still having trouble connecting to the Internet,
we recommend that you restart your router (cf. § A.6) and eventually reset the factory configuration
(cf. § A.7). You will then need to re-configure your router as a first-time setup.
A.5 Interpreting the LEDs
A.5.1
The
"
A
DS
L
"
LED
blinks
slowly
1. Check the connection of your ADSL filters. Each telephone socket of your installation which is used
must be equipped with an ADSL filter.
2. Check that the RJ11 type line cord delivered with your router is connected to one of your sockets. It is
recommended that no telephone extension is used.
3. Finally, check with your ISP that the ADSL service is available on your telephone line.
A.5.2 "Wi-Fi"
LED
off
If this LED is off, this indicates that the WLAN interface of the router is not active.
To activate the wireless network, access the HTTP configuration tool and check the box "Enable Wireless"
in the Wireless menu (see section 5).
A.5.3
All
LEDs are
off
1. Check that the type of power available in your premises is compatible with the mains voltage required
for powering your router.
2. Check that the delivered power cord is properly connected at one end to the mains power network.
3. Check that the power connector is inserted correctly in the corresponding connector (power) of the
router.
Page view 211
1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 222 223

Comments to this Manuals

No comments